Automotive Diagnostics Kit ADK610004DW

1/15

Motor management systems in cars get more and more sophisticated. When these sophisticated systems malfunction, sophisticated measuring equipment is required to locate the cause of the problem. With the TiePie engineering Automotive Diagnostics Kit ADK610004DW, the automotive specialist obtains all necessary tools, an Automotive Test Scope ATS610004DW-XMSG and special automotive accessories, to perform most of the diagnostic tests to locate the problem, all conveniently packed in a protective case.

Order code: TP-ADK610004DW-Lite

EAN: 7423647796748

Options:

  •  ATIS Lite (Lite)

  •  ATIS Pro (Pro)

Contents

The Automotive Diagnostics Kit ADK610004DW contains a selection of TiePie automotive products neatly packed in a protective carry case.

The main component of the Automotive Diagnostics Kit ADK610004DW is the Automotive Test Scope ATS610004DW-XMSG. The differential Automotive Test Scope ATS610004DW-XMSG can be used via an ethernet connection (LAN, WiFi or WAN) but also still with a USB 2.0 / 3.0 connection. The built-in battery gives the Automotive Test Scope ATS610004DW-XMSG the possibility to perform fully wireless differential measurements.

Place the Automotive Test Scope ATS610004DW-XMSG near to the engine bay and connect its inputs to the points you want to measure. Your computer can remain at a safe distance, connected via WiFi to the automotive WiFiScope, that operates as access point. No hassle of USB cables between the scope and the computer that limit your flexibility.

The high sampling rate and large memory of the Automotive Test Scope ATS610004DW-XMSG are very useful for capturing and analyzing longer fast signals such as CAN bus communications.

Several other products are included for diagnosing and solving common and less common automotive problems such as sensor malfunctions, actuator malfunctions, ignition problems, timing problems, power deficiency, etc. Refer to the automotive articles for examples of solved automotive problems.

The contents of this versatile Automotive Diagnostics Kit ADK610004DW are:

Optionally, the Automotive Diagnostics Kit ADK610004DW can be delivered with one of:

Amount
Image
Item
Description
1
Automotive Test Scope
1 GSa/s four channel automotive WiFi oscilloscope with differential / single ended switchable inputs with SafeGround protection, SureConnect, resistance measuring, 250 MHz bandwidth, 14 bit resolution and 256 Mpts memory.
4
Measure lead TP-C1812B
3 m long, BNC to banana, low noise differential measure lead.
1
Back Probe TP-BP85 - Set
8 thin and flexible back probes, 1000V CAT III with 4mm banana socket.
2
Ignition Pickup TP-IP250
Capacitive secondary ignition pickup to be clamped on a spark plug wire.
1
Current clamp TP-CC80
80A current clamp with 2% accuracy and 4mm shrouded banana sockets.
1
Current clamp TP-CC600
600A current clamp with 3% accuracy and 4mm banana sockets.
1
Accelerometer TP-ACC20 - 09
Accelerometer with 2 axes, 2g range with 420mV/g sensitivity.
4
Differential attenuator TP-DA10
Differential 1:10 attenuator, rated 300V with 25MHz bandwidth.
1
Alligator Clip TP-AC50B Set
5 alligator clips with 10mm clamping range and 4mm banana socket, rated for up to 60V.
1
Carry case BB454
Carry case for all above mentioned items.
1
Handyscope / WiFiScope power supply
To power the scope and charge its battery.
1
Ground compensation Cable TP-GCC150
To avoid measurement errors when measuring differentially, the external power supply is used and the device under test is not grounded.
1
Probe compensation cable TP-DB9-BNC-30
To calibrate standard oscilloscope probes using the built in calibration signal
1
USB 3.0 cable, 1.5m long
1
Network cable, 3m long
Amount
Image
Item
Description
1
ATIS Lite
Automotive Test and Information System Lite is a comprehensive knowledge base with generic information to help the automotive technician diagnose car problems.
1
ATIS Pro
Automotive Test and Information System Pro is a comprehensive knowledge base with generic and brand specific information to help the automotive technician diagnose car problems.
 

Description

The Automotive Diagnostics Kit ADK610004DW contains a selection of TiePie automotive products neatly packed in a protective carry case.

Automotive oscilloscope

Heart of the Automotive Diagnostics Kit ADK610004DW is the Automotive Test Scope ATS610004DW-XMSG. This PC oscilloscope turns your computer into a sophisticated automotive diagnostic system. The Automotive Test Scope ATS610004DW-XMSG can be used via an ethernet connection (LAN, WiFi or WAN) but also still with a USB 2.0 / 3.0 connection. The built-in battery gives the Automotive Test Scope ATS610004DW-XMSG the possibility to perform fully wireless differential measurements.

ADK610004DW15.png

Place the Automotive Test Scope ATS610004DW-XMSG near to the engine bay and connect its inputs to the points you want to measure. Your computer can remain at a safe distance, connected via WiFi to the automotive WiFiScope, that operates as access point. No hassle of USB cables between the scope and the computer that limit your flexibility.

Equipped with four differential inputs, this automotive oscilloscope guarantees measuring multiple signals without the risk of creating short circuits through the oscilloscope. This compact automotive oscilloscope is battery powered, which makes it easy to connect it to a laptop computer and perform measurements while driving the vehicle. The large input range, the long memory buffers and high maximum sampling rate make it the possible to capture almost any automotive signal. The built in SureConnect connection test feature on each channel informs whether the test points have electrical connection to test subject, leaving no doubt whether there is no connection or no signal.

Automotive Test and Information System

The ATIS Automotive Test and Information System is a large knowledge base with information on almost all electrical and electronic components that are used in the motor management system of a car. In an intuitive graphical environment background information on sensors and actuators can be found, as well as detailed schematics, diagnosis instructions, component locations with photographs of most available cars and example signals for proper functioning components. The unique point of ATIS is the direct coupling between the diagnosis instructions with the example signals to the measuring instrument. One click of the mouse in ATIS will launch the automotive measurement software and load the specific settings to measure on the particular component. The mechanic can focus on finding the problem, he does not need to find out how to setup the instrument.

ADK610004DW6.jpg

The Automotive Diagnostics Kit ADK610004DW can be delivered with ATIS Lite or with ATIS Pro. ATIS Pro contains an extensive database with more schematics, connection diagrams and oscilloscope settings with reference signals.

Measuring leads

To connect the Automotive Test Scope ATS610004DW-XMSG to the automotive circuits, the Automotive Diagnostics Kit ADK610004DW contains a set of four special measuring leads. The Measure lead TP-C1812B is a 3 meter long low noise BNC to 4 mm banana measuring lead, specifically designed to be used on differential oscilloscope inputs. The two ends of the Measure lead TP-C1812B with the banana plugs can be placed 2 meters apart, without picking up external disturbances. The length of 3 meter allows to connect the instrument to components under the hood while the instrument is located on the passenger seat, making it possible to perform measurement while driving. The measuring lead is made of silicone, making it heat resistant and oil resistant, perfectly suitable for automotive applications. The 4 mm banana plugs make it possible to connect a variety of test points or clamps.

ADK610004DW14.jpg

Current clamps

To measure large currents, like e.g. starting currents, a Current clamp TP-CC600 is included in the Automotive Diagnostics Kit ADK610004DW. The Current clamp TP-CC600 makes it possible to measure current with your automotive oscilloscope, without the need of breaking the circuit. Simply clamp the Current clamp TP-CC600 around the wire and measure the current, up to 600 A. Current measurements can reveal problems that with a voltage pattern remain hidden, like e.g. compression problems that are visible in the starting current.

Many components draw far less than 600 A, making the also in the Automotive Diagnostics Kit ADK610004DW included 80 A Current clamp TP-CC80 a more suitable current clamp. It will measure up to 80 A, giving a much higher accuracy at low currents than the Current clamp TP-CC600. Use it to reveal problems in driving injectors, measuring leakage currents etc.

Back probes

The Automotive Diagnostics Kit ADK610004DW contains a set of Back Probe TP-BP85s. These thin and flexible measuring probes fit on any test lead with 4 mm banana plugs and make it possible to connect to hard to reach places. They allow to back probe wires in connectors, without breaking the circuit, without the need of break out boxes and without damaging the wire isolation. The set contains 8 probes, four black ones, a red, a yellow, a green and a blue one, matching the input channel color coding of the Automotive Test Scope ATS610004DW-XMSG.

Ignition pickups

To safely measure the high voltage secondary ignition signals, the Ignition Pickup TP-IP250 is added to the Automotive Diagnostics Kit ADK610004DW. Simply clamp the Ignition Pickup TP-IP250 around a spark plug cable and measure the secondary ignition signals, both from normal ignition systems and DIS ignition systems. Two pickups are included.

Accelerometer and manual trigger button

The Accelerometer TP-ACC20 - 09 is a dual axis accelerometer combined with a manual trigger button. It can be connected to the extension connector at the rear of the Automotive Test Scope ATS610004DW-XMSG and two input channels.

 

The dual accelerometer measures accelerations up to 2 g in two planes. It can be used to measure vibrations in mechanical systems, but is can also be used to determine the maximum power of an engine, without the need of expensive equipment. Attach the acceleration sensor to the floor of the car and accelerate at full power. Using the weight of the car and the measured signal, the power can then be calculated by the software.

ADK610004DW9.jpg
ADK610004DW10.jpg
ADK610004DW12.jpg
ADK610004DW8.jpg
ADK610004DW7.jpg

Differential attenuators

The 80 V full scale input range of the Automotive Test Scope ATS610004DW-XMSG makes it possible to measure almost any automotive signal. In case the voltage exceeds 80 V, the Differential attenuator TP-DA10 can be used to increase the input range of the automotive lab scope. This special differential attenuator attenuates the input signal by a factor 10. It can be used when measuring e.g. primary ignition signals or fuel injector signals. The Automotive Diagnostics Kit ADK610004DW contains a Differential attenuator TP-DA10 for each channel of the lab scope.

ADK610004DW13.jpg

Alligator clips

In order to connect to various types of terminals where the Back Probe TP-BP85 cannot be used, the Alligator Clip TP-AC50B Set is included. Small enough to be used in narrow places, but enough clamping range to clamp on larger objects. Five clips are included in the Automotive Diagnostics Kit ADK610004DW.

ADK610004DW11.jpg

Convenient carry case

The Carry case BB454 is a convenient case for safely carrying your automotive tools. It offers dedicated storage locations for all parts of the Automotive Diagnostics Kit ADK610004DW, like the Automotive Test Scope ATS610004DW-XMSG and all accessories like measure leads, current clamps, test probes, ignition probes etc.

ADK610004DW2.jpg
 

Downloads

Several downloads for the Automotive Diagnostics Kit ADK610004DW are listed below, including Multi Channel oscilloscope software, drivers and manuals.

Driver & Software

Manuals & Documents