Automotive Test Scope ATS605004D-XMS

The USB labscope packed with technology

1/6

Key specifications

  • 14 bit (0.006 %) resolution (16 bit enhanced resolution)

  • Up to 500 MSa/s sampling

  • 250 MHz bandwidth

  • Up to 100 MSa/s continuous streaming

  • Up to 256 Mpoints memory per channel

  • 0.25 % DC vertical accuracy, 0.1 % typical

  • 1 ppm time base accuracy

Features

This powerful USB 3.0 super speed automotive oscilloscope combines fast sampling up to 500 MSa/s with high resolutions of 12, 14 and 16 bit and a large memory of 64 Mpoints on all four channels. Additionally, the automotive oscilloscope supports continuous streaming measurements up to 100 MSa/s.

 

The Automotive Test Scope ATS605004D-XMS is delivered with SureConnect connection test and resistance measurement on each channel.

Safe measuring

The Automotive Test Scope ATS605004D-XMS is a four channel automotive oscilloscope with differential inputs. With the differential inputs it is possible to measure four totally unrelated signals simultaneously. It is no longer possible to create a short circuit through the oscilloscope or through a second device connected to your computer and to the car, like e.g. a fault code scanner. So no risk of damaging the car, the oscilloscope or the computer.

SureConnect

The SureConnect connection test feature of the Automotive Test Scope ATS605004D-XMS tells you immediately whether your test probe or clip actually makes electrical contact or not. No more doubt whether your probe doesn't make contact or there really is no signal.

 

This is useful when surfaces are oxidized and your probe cannot get a good electrical contact. Simply activate the SureConnect and you know whether there is contact or not. Also when back probing connectors in confined places, SureConnect immediately shows whether the probes make contact or not.

 

SureConnect is default available on each channel of the Automotive Test Scope ATS605004D-XMS.

Resistance measurement

Many automotive sensors are based on variable resistors. Use your Automotive Test Scope ATS605004D-XMS in the resistance setting to test them, no more need to take a separate ohm meter. Resistance values can be displayed as a number, but it is also possible to display the resistance variation in time, in a graph.

 

The unique Automotive Test Scope ATS605004D-XMS Ohm scope is the first fast automotive Ohm scope in its class.

Large memory

When measuring at high sample rates, a large memory is necessary to be able to record a complete signal in the acquisition buffer. Where most oscilloscopes have 2.5 kpoints or 100 kpoints memory, the Automotive Test Scope ATS605004D-XMS has up to 256 Mpoints memory per channel. An advantage of a large memory is that once-only fast phenomena can be captured accurately or complete serial communication signal blocks can be measured all at once.

High accuracy

The Automotive Test Scope ATS605004D-XMS measures with high resolutions of 14 and 16 bit. A signal measured with the Automotive Test Scope ATS605004D-XMS therefore has 256 times more resolution than most standard automotive oscilloscopes, which usually have a low resolution of 8 or 9 bit. The input circuit of the Automotive Test Scope ATS605004D-XMS has a high accuracy of 0.25 % of the full scale input range, where most standard automotive oscilloscopes have an accuracy of 2 - 3 % of the full scale range. The precision Automotive Test Scope ATS605004D-XMS allows for measuring signals with much more accuracy.

 

Automotive Test Scope ATS610004D-XMSG specifications

The tables below show detailed specifications of the Automotive Test Scope ATS610004D-XMSG.

Acquisition system

Resistance measurement

  1. On some computers, the highest streaming rates may not be available, due to computer restrictions.

  2. ≤ 40 MSa/swhen connected to USB 2.0

  3. ≤ 20 MSa/swhen connected to USB 2.0

  4. ≤ 10 MSa/swhen connected to USB 2.0

  5. ≤ 5 MSa/swhen connected to USB 2.0

Sampling clock source

Trigger

Multi-instrument synchronization

Combining instruments is only available when all instruments are connected via USB.
When instruments are connected via LAN or WiFi, combining is not available.

Probe calibration

Interface

Power Requirements

Physical

I/O connectors

System requirements

Environmental conditions

Certifications and Compliances

Package contents

Customer service

TiePie engineering instruments are designed, manufactured and tested to provide high reliability. In the unlikely event you experience difficulties, the TiePie engineering instruments are fully warranted for two years.

 
 

Package Contents

The Automotive Test Scope ATS610004DW-XMSG is delivered with:

Downloads

Several downloads for the Automotive Test Scope ATS610004D-XMSG are listed below

Driver & Software

Manuals & Documents